https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Material-Icons_e32a134_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-11-01 16:54:402017-02-13 10:54:41Industrial safety
Risk management ISQ offers risk management of projects to minimize threats and impacts on the project resulting from fortuitous occurrences. On the other hand it takes opportunities that may arise to meet or reduce deadlines and costs, to improve quality and safety and to identify opportunities for improvement and compliance with ISO 31000. Assessment of professional risks Assessment of professional risks involves a methodical analysis, based on the principle of "Company Knowledge" thus enabling ISQ to comply with the Labour Code and to ensure both safety and health of its workers, based on OHSAS 18001 and NP 4397 standards. Organisation of safety and health in the workplace systems ISQ is an ACT accredited body for the Organization of Services of Safety in the Workplace, to prevent occupational risks and to promote and monitor the health of workers. Seveso Directive Support in the compliance with the requirements set out in the Seveso Directive for businesses where dangerous substances are present and on risk analysis in "Seveso establishments". Forensic analysis ISQ provides technical expertise, for both individuals and companies (insurance companies, expert technical work companies, etc.) and judicial authorities, along with research of accidents at work, using the most appropriate methodology, particularly RCA (Root Cause Analysis). Safety adviser for transportation of dangerous goods Support as safety adviser for companies whose activities are operations of road transportation of dangerous goods, packaging operations, cargo, filling or discharge connected with this kind of transport, developing diagnosis activities, advice and implementation of appropriate measures.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/FontAwesome_f074112_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-11-01 12:54:022017-02-13 10:55:21Calibration of gas flow, gas volume, speed and amount of substance gases equipment
The gas and flow laboratory is undergoing development to bring greater dynamics to all services provided. The laboratory is accredited by IPAC – the national entity member of EA (European Cooperation for Accreditation) to perform calibration in the following equipment: Gas volume and flow Domestic and industrial gas meters Flowmeters Wet gas meters Anemometers Amount of material Gas analysers (CO; CO2; NO; NO2; SO2; O2; H2S; CH4; C3H8) Certifications of gaseous mixtures (CO; CO2; C3H8; O2)
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Inspecoes-Tecnicas-FontAwesome_f018262_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-31 01:14:422017-02-13 10:57:18Inspection of bridges and viaducts
ISQ has vast experience in the area of technical inspections of bridges and viaducts in concrete, steel and mixed or masonry. Either at the level of construction, inspection in operation, improvement or renovation, ISQ supported by a large team of skilled human resources and state of the art equipment and accredited laboratories provides a set of services able to satisfy all the client's needs. ISQ expertise Management of construction works Routine inspections Inspections and materials' characterisation tests Assessment of condition and state of degradation of existing works Solutions for improvement, repair or replacement of components Inspection and quality control of renovation works On-line monitoring Construction supervision
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Inspecoes-Tecnicas-Material-Icons_e7f135_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-30 15:11:432017-02-13 10:56:41Construction inspection of industrial equipment and installations
Construction inspection of industrial mechanical or electrical equipment and installations is one of the traditional services provided by ISQ. ISQ provides inspection of stand-alone equipment or complete industrial installations to check the manufacture and assembly of new equipment or to perform maintenance of units in-service. Construction inspection of industrial equipment and installations in-service to check the compliance with technical specifications and applicable regulations to ascertain the preservation status of these units, to predict its remaining useful life and to establish repair or replacement programs in a more cost-effective way and with minimum impact on production. ISQ expertise Project review based on construction codes or standards and regulations Reception of materials Design or approval of inspection and testing plans Qualification of both staff and operational methods Monitoring of both manufacturing and assembly Non-destructive control Testing supervision Inspection of anticorrosive protection Design of maintenance plans Periodic inspection and assessment of the status of both equipment and installations in-service Remaining life assessment (RLA) Risk-based inspection (RBI) Design of repair specifications Monitoring of shutdowns for maintenance of industrial installations On-line monitoring Support to licensing
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/09/FontAwesome_f0f0217_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-30 12:02:042017-02-13 10:54:42Occupational health and safety
Industrial hygiene Assessment and control of workers' exposure to physical, chemical and biological agents in industrial establishments, workshops, warehouses and laboratories Assessment studies on occupational exposure are performed on the basis of international reference documents and international and portuguese standards (ex: NIOSH; OSHA; HSE; AIHA; NP 1796:2007). Chemical agents Qualitative risk assessment - identification of chemical agents in the work environment and assessment of the risk arising from the presence of these agents, based on their toxicological and physical properties Quantitative risk assessment of chemical agents - dust, fibres, gases, vapours, aerosols and smoke Physical agents Assessment of thermal comfort according with ISO 7730 Assessment of thermal stress, with calculation of WBGT index, according with ISO 7243 Assessment of exposure to artificial optical radiation Assessment of exposure to electromagnetic fields, particularly ionising and non-ionising radiation Assessment of lighting levels Biological agents Assessment of exposure to biological agents, with identification of risk groups. Indoor air quality assessment Assessment of indoor air quality in buildings and non-residential autonomous fractions involving regular safety inspection of the HVAC system and measurement of chemical, physical and biological parameters (carbon dioxide, carbon monoxide, Volatile Organic Compounds (VOC), ozone, formaldehyde, PM10, radon, bacteria, fungi, legionella, temperature, humidity, air speed, air flow rates, number of renewals, efficiency of ventilation and pressure differential, in order to check under pressure or overpressure of rooms). Assessment of thermal comfort and stress Thermal comfort assessment based on ISO 7730:2005 and proposal of appropriate technical solutions to each case. Thermal stress assessment based on WBGT index (Wet Bulb Globe Temperature), according to ISO 7243. Radiological protection program Development of radiological protection programs in companies that have radioactive sources, and definition of actions to develop regarding protection against ionizing radiation. Classification of clean rooms Classification of clean rooms based on ISO 14644.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/Material-Icons_e53164_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-29 09:59:402017-02-13 10:54:41Calibration equipment for the car sector
The Technical Car Center Laboratory is specialized in the development of methods and procedures of onsite calibration/verification and is a benchmark of pioneering and remarkable practices in measurement equipment. This laboratory calibrates and tests all the equipment of car inspection centers of A and B category. It calibrates and tests DMM´s (Device Monitoring and Measurement), associated to car dealers. It is qualified to perform exhaust gas and opacimeter inspections. The laboratory calibrates and tests the following equipment: Car inspection centers Roller brake tester for motorbikes, quads and light heavy, mixed and heavy vehicles Vehicle side slip tester Suspension test lane Weighing system associated with mixed and heavy vehicle roller braker tester Power test stand Steering wheel aligning machine Machine inspection of 3D quotas Levelling of elevators Headlight tester + Flatness tester Road surface Pedometers Braking system tester Speedometer Legal metrology Analysers of exhaust gases Opacimeter Car dealers Wrench keys Manometers Painting greenhouses Feeler gauge Calliper gauge Micrometers Comparators Rods Oil meters Wheel calibrators Painting scales Machines to load A/C
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/octicons_f08523_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-28 20:15:402017-02-13 10:54:41Dimensional equipment calibration, roughness and hardness
ISQ dimensional metrology laboratory develops new techniques and testing, calibration and measurement solutions. It performs also calibrations on the following equipment: Callipers Internal and external Micrometers, of two point, three point and depth Dial gauge Measuring, plane and bevelled rods Gauge blocks Standard wires Settings standards Optical glass Plug and ring gauges: plain or threaded Surfaces in granite and steel Gaps/ray/screw verifiers Levels Universal bevel protractor Squares Test Sieves Thickness gages Roughness standards Periphery tapes Scales 3D Measuring machines Hardness testers Measuring columns Profile projector Extensometer Measuring banks Tool machines Speed
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/09/Inspecoes-Tecnicas-FontAwesome_f12e183_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-28 03:45:042017-02-13 10:57:18Condition assessment of equipment and installations in-service
ISQ offers a comprehensive set of technical inspection services, providing customers detailed technical information on the state/condition of their facilities and equipment. ISQ expertise Compliance with legal and regulatory requirements Conditions of installation and/or operation State of maintenance and/or degradation Conditions of safety of personnel and/or infrastructure, facilities and equipment ISQ interventions, in functional assessment of facilities and equipment, are generally complemented by other technical subjects, such as civil construction, mechanical, dynamic equipment, etc.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/Iconic_260270_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-27 09:29:312017-02-13 10:53:59Temperature and humidity testing
Accredited laboratory to perform testing in the areas of temperature and humidity. Test and characterization equipment Ovens/Incubators/Refrigerators/Chest freezers/Freezing chambers/ (-197 to 350 ºC) Vacuum ovens / liquid baths (-197 to 180 ºC) Climatic chambers (-50 to 180 °C / 5 to 98 %RH) Climatic test room/wharehouse (environmental conditions) Calibrators ovens (-197 to 1500 °C) Thermocycler/heated blocks (35 to 450 ºC) Dry block heaters (-100 to 1500 ºC) Muffle furnace (100 to 1200 °C) Qualification climatic chambers (pharmaceutical), refrigerators, refrigerated vehicles (-80 to 20 °C) Climatic test room/Refrigeration chamber/Hospitals freeze/Ultra-low temperature freezers (-80 to 0 °C) Cell preservation tanks (-196 ºC) Sterilization autoclaves (0 to 140 °C / 0 to 2.5 bar abs.) Centrifugal machines, testing of temperature and rotation (1 to 30000 rpm) Timers - determination of time between occurrences T ≥ 0.5 s
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/Material-Icons_e89f44_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-25 09:51:002017-02-13 10:55:56Dimensional testing and measurement of components
The Dimensional Laboratory seeks to develop new techniques and solutions of testing and calibrations, using highly qualified technical staff and capable equipment and always trying to keep modern, optimised laboratory premises, duly prepared for calibration and measurement operations, to achieve the best results. The laboratory performs measurement of components (assorted moulds), among others parts in the different sectors of the industry. We perform also digitalisation of parts for further comparison purposes with the help of CAD or for reverse engineering purposes.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Ensaios-Analises-octicons_f0d40_256-1.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-25 02:56:072017-02-13 10:53:58Electrical equipment testing and component reliability
Electric equipment testing covered by the Low Voltage Directive according to the European Standards which assumes its compliance with the essential safety requirements. Performance of this kind of testing is one of the pre-conditions for CE marking, within the scope of safety of electric equipment and its sale in the European Economic region. Testing to monitoring and support to manufacturers in the validation of all stages of product from specifications through to review testing and product inspection. This process may involve a product certification body. ISQ has agreements with the Certification Body CERTIF (Association for the Certification) for swifter certification process which issue the licenses based in the ISQ test reports. Reliability testing of components or sub-assemblies in the electric and electronics field, automotive and aerospace. In-service electric equipment testing Testing and measurement of electrical equipment and instrumentation in operation, checking its legal and regulation compliance, maintenance and safety conditions in the electric engineering and instrumentation area. Insulation resistance and dielectric strength Checking transformers processing ratio (TPR) TT and TI processing ratio Circuit-breakers up to 600 A Direct and indirect relays Resistance of earth connection and continuity of earth connection Differential protections Power load testing of emergency generators with resistive loads up to 300 kW Checking the status of each element of the battery Checking the condition of system capacitors of power factor correction Measurement of the contact resistance of the contacts of the poles of isolators and circuit-breakers Direct and indirect relays Measurement of currents, voltages, power and other ratios Thermographic examinations Field instruments Measurement and control loops Electric safety and performance testing of different appliances Transformers (EN 61558 series) Switches for appliances (EN 61058 series) Control devices (EN 60730 series) Electronic equipment (EN 60065) Electrical equipment for industrial use (EN 60204 series) Household, commercial and similar appliances (EN 60335 series) Information technology equipment (EN 60950 series) Light sources, including lighting appliances or luminaires (EN 60598 series) Low-voltage switchgear and control gear for electrical installations - sockets and connectors (IEC 60884, NP EN 1260, EN 50075 standards), installation switches (EN 60669 series), connection devices (EN 60998 series), boxes and enclosures (EN 60670 series) Welding machines (EN 60974 series) Electric low voltage switchboards (EN 61439 series) Laboratory equipment (EN 61010) Fire detection and fire alarm systems (EN 54 series) Intrusion detection systems (EN 50131 series) IP index of protection of enclosures (EN 60529) Reliability testing of components Reliability testing of components or sub-assemblies in the electric and electronics field, automotive and aerospace. Durability testing of assemblies and components, ensuring at the same time monitoring of different parameters (electrical, mechanical, etc.). Cold and dry heat (EN 60068-2-1, EN 60068-2-2) Damp heat (EN 60068-2-30, EN 60069-2-78) Heat and temperature cyclic (EN 60068-2-38) Ageing combining different cycles of temperature and humidity Saline mist (EN 60068-2-11, EN 60068-2-52) Thermal shock and temperature variation (EN 60068-2-14) Exposure to dust (EN 60529, EN 60068-2-68) Leak tightness (EN 60529) Drop (EN 60068-2-31, EN 60068-2-32) Low pressure and dry heat (EN 60068-2-41) Ozone Fluency Solar radiation and rain (EN 60068-2-5, EN 60068-2-9) Power pumping, cyclical twisting Sinusoidal vibration, random and shock in 3 axes, combined with cycles of temperature and humidity (EN 60068-2-6, EN 60068-2-27, EN 60068-2-53, EN 60068-2-64) Resistance to chemical agents Mechanical and electrical endurance Assessment tests of mechanical resistance to impact
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Inspecoes-Tecnicas-Material-Icons_e332132_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-24 05:21:452017-02-13 10:56:40Inspection of HVAC networks and ventilation systems
ISQ performs inspections of HVAC systems, cold/heat and ventilation in households, services buildings and industrial units. HVAC Inspections of both comfort and process HVAC systems in buildings and industrial units, checking its compliance with both processes and comfort status. Cold/heat Inspections of cold and/or heat production systems in buildings and industrial units, checking its compliance with both process and comfort status, in particularly on cold storage systems for perishable products, using cold fluid production systems or direct expansion systems, heat pumps, heat transfer fluids generators, boilers. Ventilation Technical inspection of ventilation systems in households and in service buildings or in industrial plants and warehouses to check their correct installation, analysis of operating problems and energy consumption, as well as calculation of air flows, insufflation and/or extraction.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/octicons_f09621_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-23 17:53:562017-02-13 10:54:41Calibration in the areas of mass, volume and force
The Laboratory of Mass, Volume and Force is accredited by the IPAC – the national entity member of EA (European Cooperation for Accreditation) to perform calibrations in the following equipment. Mass OIML masses Unclassified masses Weighing instruments Volume Micropipettes Dispensers Piston burettes Laboratory glassware Force Dynamometers Force proving rings Tension and/or compression testing machines Torque wrenches Torque meters
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Ensaios-Analises-Entypo_d83d285_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-23 10:55:412017-02-13 10:53:59Electromagnetic compatibility testing
Testing emission on electromagnetic compatibility (EMC) aims at assessing the possibility of electrical and electronic equipment interfering with other equipment and with radio and telecommunication systems. The activity of the EMC Laboratory focuses on testing for compliance with the legal requirements, standards and customer specifications. The laboratory performs testing during all stages of product life, including precompliance testing, final testing, product inspection and validation. This process may involve a product certification body. ISQ has agreements with the Certification Body CERTIF (Association for the Certification) for swifter certification process which issue the licenses based in the ISQ test reports. Emission Tests Equipment testing Residential, commercial and light-industrial environments – EN 61000-6-3 Industrial environments equipment - EN 61000-6-4 Household, electric tools and similar apparatus – EN 55014-1 Information technology equipment -EN 55022 Measurement, control and laboratory electric equipment - EN 61326 Lighting and similar equipment -EN 55015 Industrial, scientific and medical equipment - EN 55011 Railway applications - EN 50121-x Automotive environments - CISPR 25 Test capacity Harmonic currents - EN 61000-3-2 Voltage fluctuations and flicker - EN 61000-3-3 Discontinuous noise in power ports/clicks - EN 55014-1 Radiated disturbance power - EN 55014-1 Radiated magnetic field - EN 55015 Continuous noise in power ports - EN 55022 Continuous noise in telecommunication ports - EN 55022 Radiated electromagnetic field - EN 55022 ESA conducted emissions, voltage method – EN 55025 ESA radiated emissions, ALSE method – EN 55025 ESA transient emissions – ISO 7637-2 Immunity Tests Equipment testing Equipment for residential, commercial and light-industrial environments – EN 61000-6-1 Industrial environments equipment - EN 61000-6-2 Household appliances, electric tools and similar apparatus - EN 55014-2 Information technology equipment - EN 55024 Measurement, control and laboratory electric equipment - EN 61326 Lighting and similar equipment – EN 61547 Fire, intruder and social alarm systems components – EN 50130-4 Fire detection and fire alarm system components – EN 54-x Railway applications - EN 50121-x Weighing instruments – EN 45501/OIML R-76 Short-Range Devices, SRD – EN 301489-3 Test capacity Electrostatic discharges - EN 61000-4-2 Radiated electromagnetic fields - EN 61000-4-3 Electrical transients/bursts - EN 61000-4-4 Surges - EN 61000-4-5 Conducted disturbances, induced by radio-frequency fields - EN 61000-4-6 Magnetic fields at mains frequency - EN 61000-4-8 Pulse magnetic field - EN 61000-4-9 Voltage dips, short interruptions and voltage variations - EN 61000-4-11 ESA electrical disturbances – ISO 7637-x ESA electrostatic discharge - ISO 10605 ESA radiated electromagnetic disturbance, ALSE – ISO 11452-2 ESA conducted electromagnetic disturbance, BCI – ISO 11452-4
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/11/Formacao-Material-Icons_e3f1120_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-22 20:10:372017-02-13 10:55:20ISQ Certification - steel piping welder
This training course gives access to the license of steel piping welder. Participants will be able to: Update and improve their technical skills as to welding of gas steel piping, via SER and TIG processes along with further skills as to equipment, consumables and its applications Assess the defects in welding, deformations and warpage
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/11/Inspecoes-Tecnicas-FontAwesome_f12d182_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-20 23:03:232017-02-13 10:56:40Cathodic protection
ISQ offers inspection, auditing services and monitoring of cathodic protection systems for the mitigation of corrosion on underground or submerged structures. ISQ adopted an effective and accurate approach to performance and control of these systems. Economically feasible, it reduces repairs costs and allows for early diagnosis. We use remote monitoring and control technology which does not require regular on-site visits to assess the existence of interference and further enables early detection of faults and malfunctions, thus saving time and resources. ISQ offers cathodic protection modeling to make a local diagnosis of the level of protection as well as assessment of eventual changes to the system such as introduction of localized damages to coating, interference with other structures, estimating the condition of perishable components of the system - coating and/or anodes, enabling an effective and appropriate corrective action. ISQ expertise Design of cathodic protection systems Implementation of systems of cathodic protection On-site or remote monitoring of relevant parameters Inspection and diagnosis of existing systems, in particular with regard to measurement of potential, coatings condition (DCVG and CIPS) Optimizing the performance of the systems Environment characterization which equipment are exposed to (resistivity of the medium and physical-chemical characteristics)
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/11/Inspecoes-Tecnicas-Material-Icons_e55869_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-20 18:43:092017-02-13 10:57:18Inspection and reception of materials and equipment
The inspection and approval of materials and equipment in shop and on-site minimizes the possibility of materials and/or equipment not complying with technical specifications (building codes, standards, specifications of project and applicable legislation). Decreases the risks that can lead to a reduction in the expected lifecycle and costs, as well as the possibility of accidents with adverse consequences for the personnel and environment and thus reducing social impact or material losses (delays, losses of production, repairing and increase of insurance premiums). Provision of these services is done in the context of new constructions, repairing and maintenance either for civil, electrical or mechanical sectors. These services aim at to confirm that materials and equipment meet the requirements of the purchase order establishing their condition upon reception (conservation status, damage during transportation, etc.). ISQ offers highly experienced and certified personnel with state of the laboratorial support allowing the implementation of the most correct and cost effective technical solutions to overcome any non-conformities detecting during reception of materials and equipment both in shop and on the assembly site.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/08/Entypo_d83d76_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-18 06:26:422017-02-13 10:56:39Metrological verification in the areas of mass and force
Qualified Laboratory to perform metrological verifications of weighing and mass machines and of strength testing machines.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/09/Inspecoes-Tecnicas-Iconic_26a1167_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-15 19:56:322017-02-13 10:57:18Inspection of electric equipment
By performing technical inspection ISQ characterizes the status/condition of electric equipment and that of instrumentation and control, maintenance, degradation status and safety conditions. ISQ expertise Checking compliance with applicable standards and regulations Verification of the installation and operation conditions Assessment of the maintenance and degradation status of electric equipment Equipment covered Medium and low tension electric meters Transformers Cut and protection devices, for example: direct and indirect break switches, circuit breakers and direct and indirect relays Electric engines Energy generating groups and uninterrupted energy feeding systems Industrial rectifiers and batteries Condenser battery systems Cathodic protection systems
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/09/FontAwesome_f11e197_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-15 08:00:092017-02-13 10:53:59Management systems consulting/auditing
Management systems consulting is there to help organisations by creating methodologies that help them develop and find the best way to achieve improved internal process effectiveness and efficiency, thus offering more suitable products, meeting the expectations of customers and helping them to increase their productivity and competitiveness in an ever more competitive environment. Consulting services rendered by ISQ further enable organisations to certify their management system, particularly in highly regulated sectors, in order to maintain their competitiveness. Quality ISQ provides consulting and auditing services of quality managements systems according to the universal used standard NP EN ISO 9001. Other standards or technical specifications adapted to industrial sectors can be used by ISQ, such as, TS 16949 to the car industry. Energy Energy management systems consultancy ensures more rational product enhancement during the different processing stages and control of energy impacts. The ISQ approach focuses on minimizing energy consumption while ensures the quality of both products and processes assisting companies in their corporate responsibility improvement. ISQ use commonly NP EN 16001 standard (equivalent to ISO 50001). Innovation and development To provide consulting and auditing services of innovation and development managements systems ISQ use NP 4456, NP 4457, NP 4458 standards along with technical specifications adapted to specific industrial sectors. Social responsibility and sustainability Analysis and control of social impacts contribute positively to the development of products and processes and the quality perceived by the community, resulting in duly implemented social and ethical practices. Internationally accepted standard is SA 8000, although ISQ also uses the increasingly relevant GRI - Global Reporting Initiative reference. Food safety Analysis and control of the impacts on quality to ensure maximization of the quality perceived by customers and compliance with the implicit quality in the product, normally governed by compulsory legal requirements. Commonly used standard is NP EN ISO 22000 (equivalent to ISO 22000). ISQ also uses the BRC and IFS references, increasingly required in many contracts. Safety and health at work Consultancy in safety at work management systems enables organisations to certify their health and safety at work management systems. Standard used is NP 4397 (similar to OHSAS 1800 specification). Other standards or technical specifications adapted to industrial sectors are additionally used by ISQ. Environment Consultancy in environmental management systems by ISQ is there to analyse and reduce environmental impacts during the production cycle and on all stages of product processing. Universally used standard is NP EN ISO 14001 (equal to ISO 14001). There are further standards or technical specifications adapted to industrial sectors and which can be used as reference or used complementarily. Integrated management systems ISQ consulting in Integrated Management Systems enables organizations, in addition to the development of their internal processes, to obtain certification of its integrated management system, covering aspects related to environmental impacts, quality, social and safety and health at work, usually governed by compulsory legal requirements. Standards used are NP EN ISO 14001, NP EN ISO 9001, SA 8000 and NP 4397, respectively for environment, quality, social responsibility and safety and health at work.
https://www.isq.pt/EN/wp-content/uploads/sites/87/2016/10/Inspecoes-Tecnicas-Iconic_e02e164_256.png 256 256 INSTITUTO DE SOLDADURA E QUALIDADE https://www.isq.pt/EN/wp-content/uploads/sites/78/2015/12/ISQ-logo.png INSTITUTO DE SOLDADURA E QUALIDADE2016-10-12 05:29:242017-02-13 10:56:40Inspection and testing of steel cables
ISQ assess the integrity of steel cables and other materials, anticipating and avoiding risks of failure and accidents caused by uncorrect design, installation and/or use. ISQ expertise Visual inspection, evaluation and assessment of electromagnetic integrity of steel cables (steel cables installed in devices for lifting of loads, ex.: cranes, overhead crane), according to ISO 4309 Visual inspection, evaluation and assessment of electromagnetic integrity of steel cables (steel cables installed in devices for the lifting of persons, ex.: cable cars, ski lifts, funiculars), according to standards EN 12927-6, EN 12927-7 and EN 12927-8 Audits and expert technical assessment Support to the development of inspection procedures and tests Training Applied to any kind of equipment both on-shore or off-shore incorporating steel cables for sustaining and/or lifting cargo and people. Examples: steel cables installed in flares, bridge cranes, mobile cranes, lifting platforms, elevators, funicular railways, ski lifts, cable cars, etc.
ISQ is a private, independent entity with 50 years of activity, providing inspection, testing, training and technical consulting services.
Tel.: +351 214 228 100
Lisboa – Taguspark
Vila Nova de Gaia
Loulé / Sines